- Dimensions
- Ø45 × 138 mm
- Battery
- 1800 mAh
- Runtime reference
- Approx. 21 min (cumulative · 2-min auto-off)
Choose clearly. Use confidently.
A practical starting point for choosing a pump, understanding its operation and reviewing a sample for your market.
Find your starting pointAvailable models, customer production cases and development designs are identified separately throughout this guide.


Travel vs Household Storage: How to Choose a Cordless Vacuum Pump
Start with the task. Choose the bag and cordless pump together.
Read the guideStart with what you need.
Choose a market, a project stage and a function. Then review the relevant models with us.
- Dimensions
- 50 × 78 mm (max. W × H)
- Battery
- 1400 mAh
- Runtime reference
- Approx. 16 min (cumulative · 2-min auto-off)
Practical notes. For use and evaluation.
Select a topic for a concise checklist. Model-specific instructions and sample review remain the final reference.
Good compression starts with a suitable bag, a clean closure and a stable connection. Use the instructions for the selected bag and pump as your operating reference.
- 01
Prepare and close the bag.
Pack suitable items according to the bag instructions and the items’ care requirements. Check the closure for trapped fabric, fibres or folds before sealing it.
- 02
Connect and operate.
Prepare the valve as instructed, align the reviewed pump connection and follow the model’s start and stop instructions. Keep the contact stable and the air path unobstructed.
- 03
Finish and review.
Stop according to the bag and pump instructions, then finish the valve closure. If compression is slow or the bag loosens, review the seal, valve and connection before assuming a pump fault.
For charging and care, follow the selected model’s input marking and current instructions. Ask us for the matching version when reviewing a sample.
Review a sample with usA useful evaluation connects the result to the model, bag and test conditions. Compare like-for-like samples and keep a short record of how each result was obtained.
- 01
Keep the conditions comparable.
Record the pump model and configuration, battery condition, bag dimensions, contents, filling level, seal and valve fit. Agree the start point and completion criterion before timing.
- 02
Match figures to the model.
M10 manufacturer references are approximately 20 seconds for a 60 × 40 cm bag of ordinary clothing and 40 seconds for a 100 × 70 cm bag. Results vary with the actual setup.
- 03
Separate footage from a test record.
An accelerated clip is not a stopwatch record. Manufacturer demonstrations, design visualisations and CAD views explain different things; development performance still needs prototype validation.
KZ-001 and MRS-001 runtime references are cumulative, with approx. 2-min auto-off, not continuous operation or a guaranteed bag count per charge.
Review a sample with usGive the team a shared reference before reviewing samples or preparing an order. A model, a destination market and an intended bag are useful starting points.
- 01
Define the product.
Identify the model, colour, logo and packaging direction. State whether you want an existing product or joint development, and include expected quantity and the intended application.
- 02
Agree what to review.
Review appearance, dimensions, operation, valve fit and the agreed electrical configuration. Record the sample version and any changes so the approved sample can be matched to the order.
- 03
Request matching information.
Ask for the current specification and operating information for that model and configuration. Review relevant market and design-IP documents against your destination and project scope.
Document scope and availability are confirmed for the selected configuration and destination. The enquiry is a request for matching information, not a blanket market-approval promise.
Review a sample with usM10, KZ-001 and MRS-001 are designed around common vacuum-storage bag valves. For these models, NULORA’s manufacturer estimates compatibility with more than 95% of these valves on the market.
- 01
27 mm inlet inner diameter.
The manufacturer confirms a 27 mm inner opening for M10, KZ-001 and MRS-001. This is the inlet’s inner diameter, rather than the pump body diameter.
- 02
Made for common bag valves.
Typical vacuum-storage bag valves are around 22–23 mm in diameter, according to the manufacturer’s market experience. Ordinary users can follow the bag and pump instructions without a separate measurement or photo-submission step.
- 03
Help for unusual valves.
If your bag uses an unusual valve structure, you are welcome to send a photo for assistance. The 95%+ coverage figure is a manufacturer assessment reference.
The 27 mm opening is confirmed for M10, KZ-001 and MRS-001 only. F10 interface details are confirmed separately. Final interfaces on development designs remain subject to engineering confirmation.
Review a sample with usWatch the product. Understand the conditions.
Our current films are manufacturer demonstrations or design-development films. Use them to examine form and operation, then evaluate your selected configuration with the intended bag.
Watch the product films60 × 40 cm
100 × 70 cm
Bag size, contents, filling, sealing, valve fit and battery condition affect the actual result. These references do not apply automatically to other models or bags.
M10 is a customer-exclusive production case, freely available for sale in China. Overseas display demonstrates capability; the existing model is not offered for orders, private label or distribution. A separate new design can be discussed.A few things worth checking.
Explore operation, runtime references and product documents for the selected model.
01Which models are available for my market?
KZ-001 and MRS-001 are current models available for sourcing and private-label cooperation. M10 and F10 are customer-exclusive production cases. M10 is freely available for sale in China, and F10 domestic China sales can be discussed. Overseas, both cases demonstrate design and manufacturing capability; these existing models are not available for orders, private label or distribution. Overseas customers can discuss a separate new design. S10, T10, X20 and D10 are development projects that have not yet entered tooling.
02Does every model inflate as well as extract air?
The vacuum-packing models and the D10 development programme serve different needs. D10 explores vacuum extraction, inflation and an integrated light source; its final functions and performance require engineering and prototype validation. Do not select a model for an unconfirmed application, including high-pressure tyre inflation.
03Will it fit common vacuum-storage bags?
The manufacturer confirms a 27 mm inlet inner diameter on M10, KZ-001 and MRS-001. Common bag valves are typically around 22–23 mm, and the manufacturer estimates coverage of more than 95% of market valves for these models. Ordinary users do not need to submit measurements or photos; help is available for unusual valve structures. F10 interface details are confirmed separately, and development interfaces are confirmed during engineering.
04Does “approximately 20 seconds” apply to every bag?
No. The M10 references relate to the bag sizes and conditions described above. The MRS-001 manufacturer reference is approximately 20 seconds for a typical travel clothing bag. These are model-specific references; bag size, contents, filling, sealing and valve fit change the result.
05Can I run it continuously for the stated battery runtime?
No. For KZ-001 and MRS-001, the stated runtime is a full-charge cumulative reference, not continuous operation. Each cycle stops automatically after approx. 2 min; restart to continue. Actual totals vary with load and conditions.
06Need a hand with operation?
If packing does not go as expected, the bag closure, valve position, pump contact and battery condition are useful places to review against the instructions. You can contact the team with the model and, if convenient, a short operation video for assistance.
07Which charging instructions should I use?
Use the input marking and current instructions for the exact model and configuration being supplied. USB-C identifies the connector; it does not make every model’s electrical configuration identical. Include the model and sample version when requesting operating or charging information.
08What do the product films demonstrate?
The website labels manufacturer operation footage and design-development content according to their purpose. Use operation footage to understand handling and use; use design visuals and CAD to discuss form and development. For procurement evaluation, request a matching sample and agreed test conditions.
Your model. Your market. The relevant documents.
Share the model, configuration and destination market when requesting specifications, instructions or relevant product documentation. Available files and their scope are confirmed for the project.