All models
A new design direction

S10

Soft forms. Thoughtful details.

A compact vacuum pump design in development. Explore the form, colour direction and potential for joint development.

Design studyJoint developmentColour exploration
Exterior & structural IP protection

Key specifications

Function
Vacuum extraction
Dimensions
Ø56 × 90 mm
Battery
1800 mAh
Material
ABS · design specification
Runtime reference
Approx. 21 min
Configuration & use notes

Design-stage dimensions. The development configuration specifies a 1800 mAh battery and an approximate 21-minute runtime reference; performance remains subject to prototype validation.

Images are design visualisations. Final tooling, materials and production appearance are agreed during development.

Tooling has not yet begun. Final configuration and performance remain subject to engineering and prototype validation.

Runtime is an approximate manufacturer reference, not a continuous-operation claim. Actual duration varies with operating mode, load, sealing, valve fit, battery condition and use conditions.

The warm glow shown inside the button bezel is a design visualisation. Its final colour, brightness and control behaviour will be confirmed during development.

Use & product informationExplore practical guidance, demonstrations and development information.
S10 / DESIGN NOTES

A softer presence at home.

S10 explores a softer visual language for vacuum storage. Rounded shoulders, a compact cylindrical body and a framed front control create a cohesive appearance. Low-saturation colour studies extend the idea into different home settings, with the emphasis on proportion, surface finish and a consistent relationship between the upper and lower sections.

  • Soft shoulders
  • Framed control
  • Muted colour studies
S10 design visualisation showing the sage-green matte ABS body, metallic-finish control and warm glow on the inner side of the button bezel
DESIGN VISUALISATION / SURFACE & CONTROL DETAIL
S10 / SURFACE & CONTROL

Soft form. A warm focal point.

A matte ABS body with rounded shoulders meets a metallic-finish control. The logo sits low on the front, keeping the face composed. Warm light on the inner side of the button bezel adds a focused visual detail.

Body
Matte ABS design
Control
Metallic finish
Light direction
Warm glow inside the bezel

S10 has not yet entered tooling. Final details and light appearance require engineering and prototype validation.

S10 / A FAMILIAR SENSE OF SCALE

Compact, with a clear reference.

A 90 mm profile with a nominal Ø56 mm body. Beside an upright ID-1 card at the same scale, S10 is approximately 1.05 times the card’s height.

Body height
90mm
Body diameter
Ø56mm

Upright ID-1 card: 85.60 × 53.98 mm. Both objects share one baseline and one millimetre scale. Nominal design dimensions are shown.

View full size graphic
Complete S10 size graphic: 90 mm body height and 56 mm diameter, compared at the same scale with an upright 85.60 by 53.98 mm ID-1 card
SAME-SCALE COMPARISON / COMPLETE DESIGN GRAPHIC
S10 / DESIGN & STRUCTURAL IP

Protected design. Rights reserved.

The exterior design and internal structure of this project are subject to intellectual property protection. Unauthorised copying, imitation, commercial manufacture or sale incorporating the protected designs is prohibited.

The scope of rights is defined by the relevant intellectual property documents. Contact NULORA for joint development or licensing.

Discuss authorised collaboration
/ PRODUCT FILM

Manufacturer demonstration. Results vary with bag size, contents, sealing and valve fit.

A closer comparison.

Model
Status
Function
Runtime reference
Market scope
Material
Dimensions
Battery
Input

Development figures are design references. KZ-001 and MRS-001 runtimes are cumulative references with approx. 2-min auto-off, not continuous operation; restart to continue. Confirm the selected configuration and samples before ordering.

Help me choose