M10
A customer-exclusive cordless vacuum pump already in production. Available for sales in China; shown overseas only as a design and manufacturing capability case, not for procurement, private labelling or distribution.
A development programme combining vacuum extraction, inflation and an integrated light source in a portable form. Explore the design and discuss an authorised development partnership.
Exterior & structural IP protection
In developmentColour directions and scene visualisations. Final colours and details are confirmed against an approved sample.
Exterior reference dimensions include the cap. The design is under detail review and is not an engineering release for tooling.
The development configuration specifies a 1800 mAh battery and an approximate 21-minute pumping runtime reference. Vacuum extraction, inflation and integrated lighting remain subject to engineering and prototype validation; this is not a separate lighting-runtime specification.
Tooling has not yet begun. Final configuration and performance remain subject to engineering and prototype validation.
Runtime is an approximate manufacturer reference, not a continuous-operation claim. Actual duration varies with operating mode, load, sealing, valve fit, battery condition and use conditions.
The in-hand, storage and lighting scenes are design visualisations. They illustrate intended settings and appearance, not measured extraction, inflation or lighting performance.
D10 brings vacuum extraction, inflation and an integrated light source into one development direction, using a taller cylindrical proportion and clearly defined sections. The green upper and lower areas frame a contrasting light-coloured centre, while a paired front control adds a horizontal counterpoint. The current exterior study concentrates on the top profile, transitions between surfaces and the balance of colour across the complete body.
A portable development design bringing vacuum extraction, inflation and an integrated light source together. Green upper and lower sections frame a white centre, with two front controls giving the functions a clear visual order.
Approximate pumping reference only. Lighting runtime remains to be validated. Actual duration varies with operating mode, load, battery condition and use conditions.
Discuss D10 development
A visual exploration of the integrated light source. Shown illumination is illustrative, not measured performance.
D10 has not yet entered tooling. Renderings show design intent; final configuration and performance require engineering and prototype validation.
Compare the complete silhouette with an upright card reference. D10 is approximately 1.34 times the card’s height, with both outlines drawn to the same scale.
Exterior design reference. The simplified silhouette illustrates size and appearance, not engineering geometry.
Height × diameter · mm
Generic ID-1 card reference: 85.60 × 53.98 mm, upright on the same baseline and at the same millimetre scale.
D10 height / upright card height
Generic ID-1 card reference: 85.60 × 53.98 mm, upright on the same baseline and at the same millimetre scale.
The exterior design and internal structure of this project are subject to intellectual property protection. Unauthorised copying, imitation, commercial manufacture or sale incorporating the protected designs is prohibited.
The scope of rights is defined by the relevant intellectual property documents. Contact NULORA for joint development or licensing.
Discuss authorised collaborationWith your permission, we measure visit sources, pages, viewing time, device and contact clicks. Your full network IP is retained for up to 7 days; visit records with a masked IP for up to 90 days. No advertising trackers. Privacy notice
Current choice: Optional analytics off